VENTS - 600W Duct Heater with 125mm Built-in Thermostat

Vents Duct Heater Features

This 600W duct heater is equipped with an internal sensor and a manual thermostat. It is designed to heat the fresh air drawn in round ventilation ducts with a diameter of 125mm. This is an add-on device that is not intended for off-duct use.

It consists of a galvanized steel frame on which the junction box is rigidly fixed, the cover of which is removable. On the junction box, there is also the manual thermostat adjustable up to 40°C. The inputs located outside the junction box allow the connection cables to be taken out for their grounding. Inside the chassis is the tubular electrical heating element (coil).

This coil heater is rated for a minimum airflow velocity of 1.5m/s. The Ventilation Systems manufacturer designs the use of an inlet air filter to protect the heating element from air impurities.

The manual thermal circuit breaker is equipped with a manual reset button (inside of it next to the Reset label). On one of the interior sides is the electrical diagram of this heater. IP40

This heater which has 125mm connection outlets is designed to be installed inside air ducts in a horizontal or vertical position. In the horizontal position, the junction box must imperatively face upwards. Horizontal deviation can be up to 90°

Info: The duct heating must be deactivated if the ventilation is not running.

• Diameter: 125mm
• Power: 600W
• Weight: 1.58kg
• Tension: 230 V
• Current: 2.6A
• Frequency: 50 Hz
• Minimum flow: 60m3/h